Digital Security Controls PC1575 Instalační manuál stáhnout pdf (Strana 84)

Modem Speaker Control - On Always, Off Always, or On Until

Connection

If your modem has a built-in speaker, you can instruct it to always be on, always be

off, or on only for the dialling part and until a connection has been established with

the panel.

Speaker Volume - Low, Medium, or High

If your modem’s speaker is used, you can select the speaker’s volume using this

variable.

Number of Rings for Auto Answer - 1 through 6

Set the number of rings before your modem answers an incoming call from the panel.

Modem Initialization Speed - Fast or Slow

Most modems will initialize at a higher speed than that of the communication with the

panel, therefore the fast setting saves a small amount of time. If however, you

experience problems with your modem try the SLOW setting.

Internal or External

If your modem is a separate unit connected to the back of your computer with a cable,

it is External. If your modem is inside the computer (if you connect the telephone line

to the back of the computer) then it is Internal.

Modem Name or Type

Press the [space bar] to view the 5 available modem types. The DSC MD12 modem

cannot be used with any other modems. If the modem is not a Practical Peripherals

PM1200, select the compatible 1200 baud modem if a 1200 baud modem is being

used. If a 2400 baud modem other than the Hayes Optima is being used, select the

compatible 2400 baud modem.

NOTE: The DSC MD12 should not be selected when using any other modem. If this

happens, communications may not be possible to the panel.

Baud Rate Selection

NOTE: Only DSC MD12 modems with software version 1.1 and later support Baud

Rate Selection. Modems with software versions 1.0 and earlier will always operate at

300 Baud.

This option only applies when used with the DSC MD12 modem. The options for this

section are as follows:

300 baud always: When this option is selected, all communications to the PC5015,

PC5010 v2.0, PC5008, PC1565-2P, PC1555/1565 and PC580/585 will be done at 300

baud as normal.

1200 baud always: When this option is selected, all communications to the PC5015,

PC5010 v2.0, PC5008, PC1565-2P, PC1555/1565 and PC580/585 will be done at

DSC’s proprietary 1200 baud format.

Auto Detect (Default Selection): When this option is selected, all communications

to the PC5015, PC5010 v2.0, PC5008, PC1565-2P, PC1555/1565 and PC580/585 will

be started at DSC’s proprietary 1200 baud format. If the telephone line is determined

to be unsuitable for 1200 baud, DLS will automatically switch the baud rate down to

300 baud until the end of the call.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 109 110

Komentáře k této Příručce

Žádné komentáře

Digital Security Controls PC1575 Instalační manuál Strana 84

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Security Controls PC1575