Digital Security Controls PC1575 Instalační manuál stáhnout pdf (Strana 28)

2.1 How to Download and Upload:

Step-by-Step Instructions

In this section, you will be shown, step-by-step, how to do simple communication to

a panel of your choice. Specifically, you will upload the entire EEPROM of the panel

to your computer.

2.1.1 Prepare the Panel for Communication with DLS-1

Go to the panel you wish to communicate with and follow the appropriate instructions

below to ensure the panel is enabled for downloading. For more information on

programming a panel at the keypad, refer to the appropriate panel Installation

Manual.

PC5015, PC5010, PC5008, PC1565-2P, PC1555/1565, PC580/585:

Preparation for Downloading — Using a Modem:

A Make note of the Download Access Code in section [403] and the Panel Identifier Code

in section [404] , so that you can enter the same values into the DLS-1 customer work file.

B The PC5015, PC5010, PC5008, PC1565-2P, PC1555/1565, PC580/585 have a 6-

hour DLS answer window for added security: after the panel is powered-up, it will

answer the phone on a double call for a 6-hour period.

Downloading can also be enabled by the user through User Functions when the

“User Can Enable DLS Window” option is enabled (section [401], option [2]). When

the user enters [

∗

][6][Master Code][5] at any keypad, the panel will be able to

answer the phone for a 6-hour period. (This time can be set to 1 hour instead of 6

hours in section [702], option[7].)

The panel will always answer the phone on a double call if “Downloading Answer”

is enabled in section [401], option [1].

If you are programming a PC5015, PC5010, PC5008, PC1565-2P, PC1555/1565, or

PC580/585 you can also program the panel to answer a call after a specified

number of rings in section [406].

C You may enable the Callback Option if you require this security feature (section

[401], option [3]). If Callback is enabled, the Downloading phone number must be

programmed (section [402]).

D If you are programming the PC5015, PC5010, PC5008, PC1565-2P, PC1555/1565,

or PC580/585 you can enable the User-initiated call-up feature, which will allow the

user to initiate a call from the panel to the DLS computer (section [401], option [4]).

PC5015, PC5010 v2.0, PC5008, PC1565-2P, PC1555/1565 and

PC580/585: Preparation for Downloading — Using PC-Link:

A Make note of the Download Access Code in section [403] and the Panel Identifier Code

in section [404] so that you can enter the same values into the DLS-1 customer work file.

PC4020, PC4010 and PC4000: Preparation for Downloading:

NOTE: All references pertain to the System Area þ DLS Section.

A Make note of the Panel ID Code and the Remote Access Code programmed in the

panel so that you can enter the same values into the DLS-1 customer work file.

B Set the “Ring Detect / DLS Enabled” feature to enable Downloading, and program

the number of rings for the panel to answer.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 109 110

Komentáře k této Příručce

Žádné komentáře

Digital Security Controls PC1575 Instalační manuál Strana 28

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Security Controls PC1575