Digital Security Controls PC1575 Instalační manuál stáhnout pdf (Strana 31)

PC1500: Preparation for Downloading:

A Note the Downloading Access Code in section [27] and the Panel Identifier Code

in section [28] so that you can enter the same values into the DLS-1 customer

work file.

B In section [14] 3rd System Option Code, enable option [2] to allow the panel to

initiate calls to the downloading computer; this

must

be done as the PC1500 can

only initiate calls and cannot answer incoming calls. If you wish the [

∗

][4] function

to require an Access Code, enable option [4] in section [14].

C In section [26], the Downloading Telephone Number must be programmed with the

phone number of the Downloading computer.

PC1150: Preparation for Downloading:

A Note the Downloading Access Code in section [27] and the Panel Identifier Code

in section [28] so that you can enter the same values into the DLS-1 customer

work file.

B Enable the control panel to call the downloading computer at option [ 2], section

[14]. The downloading computer’s telephone number must also be programmed

in section [26].

C Section [31] must have option [1] turned on to enable downloading. Option [3]

should be ON to enable the Answering Machine Override feature. To use the Call

Back feature, turn on option [2]. Set the number of rings for answer in section [29].

For the Call Back feature, program the downloading phone number in section [26].

PC560: Preparation for Downloading:

A Note the Downloading Access Code programmed in Section [14] so that you can

enter the same values into the DLS-1 customer Work File.

B In Section [06], 2nd System Option Code, turn on Zone Light 3 to enable

downloading.

NOTE:

The “double call” technique is the only method available to connect to the

PC560 for downloading. Refer to Programming Section [06] 2nd System Option Code

in the PC560 Installation Manual.

PC550: Preparation for Downloading:

A Note the Downloading Access Code programmed in Section [12] so that you can

enter the same values into the DLS-1 customer Work File.

B In Section [06], 2nd System Option Code, turn on Zone Light 3 to enable

downloading.

NOTE:

The “double call” technique is the only method available to connect to the

PC550 for downloading. Refer to Programming Section [06] 2nd System Option Code

in the PC550 Installation Manual.

DSC8400: Preparation for Downloading:

A Note the Downloading Access Code programmed in Section [23] and the Digital

Communicator Identification Code programmed in Section [24] so that you can

enter the same values into the DLS-1 customer Work File.

B Set the Number of Rings Before Answering in Section [25]. Enable downloading

by turning on option [1], section [10]. If the system is to periodically call the

downloading computer, enable option [4], section [10]. If an answering machine

is connected to the same line as the DSC8400,the Answering Machine Override

feature must be enabled (section [10], option [3]). To use the call back feature,

enable option [2], section [10].

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 109 110

Komentáře k této Příručce

Žádné komentáře

Digital Security Controls PC1575 Instalační manuál Strana 31

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Digital Security Controls PC1575