Digital Security Controls PC1575 Instalační manuál stáhnout pdf (Strana 34)

2.4 Create a Customer Work File

If this is your first session, there will be no Customer Work Files present in the Work

File directory. In this case select the “Create A File” function from the Main Menu. If

there are any files present on the disk, the file names will be displayed along the right

side of the screen. To scroll through these names, use the [ARROW] keys, [PG UP]

and [PG DN] keys, or [HOME] and [END] Keys. The first item in creating a new file is

to enter the FILE NAME. You are limited to alphanumeric characters only for file

names. Several file names are reserved as default files for use by the DLS-1 Software:

PC1150 PC15 PC1552 PC1553 PC1555 PC1565 PC1575

PC155U PC15V2 PC15V3 PC15V4 PC15V3V P16 PC16

PC1664 PC25 PC2513 PC2525 PC2585 PC51 PC30

PC3077 PC307L PC40 PC41 PC412 PC42 PC422

PC5008 PC5012 PC5015 PC5082 PC5083 PC508U PC51

PC550 PC551 PC560 PC580 PC583 PC8423 PC90

These files contain the factory default settings of their respective control panels.

These settings are changeable through the Default File Maintenance function

selected from the Main Menu. If the file name you choose already exists, you will be

warned of that fact and asked if you wish to over-write the file. If you select “Yes”, the

old file will be deleted and a new one will be created in its place.

NOTE: By doing this you can quickly return a file to default settings.

Once you have entered a valid file name, you must select the type of panel the file is

to work with. Each panel has a unique file type and only that file type can be used to

communicate with the panel. For example, a PC3000 Work File may only be used to

communicate with and store data from a PC3000 control panel. From the list

presented, select the panel type. Note that for the PC5010, PC5008, PC4020,

PC4010, PC3000, PC2550, PC1555/1565, PC1550/PC1500, PC580/585, and PC550

there are different file versions. These version numbers represent software versions

of the control panels; for example, for a PC1500 with version 2.1 software, select

VER2.X. For the PC1550, you must select the VER1.X, VER2.X, VER3.X or VER4.X file.

After the panel type is selected, a window will appear which will allow you to select

which default file to use. Refer to Section 4.5 for information on creating default files.

For now, select “Factory”. The file will be immediately created and you will be

returned to the main menu.

The new work file which you have just created is an exact copy of the factory default

settings for the selected control panel.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 109 110

Žádné komentáře

Digital Security Controls PC1575 Instalační manuál Strana 34