Digital Security Controls PC1575 Instalační manuál stáhnout pdf (Strana 68)

• Auto-Disarm Schedule

Uploads the Auto-Disarm times and the day assignments programmed in the

three Auto-Arm schedules.

• Troubles/Memory

Uploads the status of troubles. “Yes” will appear beside the Trouble Conditions

list to indicate which troubles are present; “No” will appear beside those Trouble

Conditions that are not present. An “

” will appear beside the Trouble Conditions

that are in Alarm Memory.

• System Times

Uploads the current system time, date and day of the week.

• Additional Hardware (DC1664 only)

Displays whether or not the control panel’s memory has been expanded with the

addition of an MEX2 unit.

Arm/Disarm System

This function is used to arm and disarm groups. When selected, a menu will be

displayed to allow the system to be armed or disarmed. A second menu will be

displayed to determine which Group is to be armed or disarmed. Use the mouse or

press the [SPACE] bar to tag the groups that are to be armed or disarmed.

Bypass Zones

This function is used to bypass zones on the DC1664. Note that zones may be

bypassed even when the system is armed.

A Bypass Status Screen for all 64 zones will be displayed. “Bypassed” will appear

beside each zone that is presently bypassed. Use the mouse or press the [SPACE]

bar to tag the zones that are to be bypassed.

Press [F2] to bypass zones using the bypasses recorded in the Bypass History.

Press [F5] to remove the bypasses from all zones.

Quick Arm

This function is used to enable or disable the Quick Arm function.

Door Chime

This function is used to enable the Door Chime function. A Door Chime Status Screen

for all 64 zones will be displayed. “Chime” will appear beside each zone that will

activate the Door Chime when opened. Use the mouse or press the [SPACE] bar to

tag the zones that are to chime.

Auto-Arm Control

This function is for programming the Auto-Arm/Disarm Schedules. Times entered in

this section must be entered in the 24-hour format (for example, 4:00 pm would be

entered as 16:00).

Panel Date and Time

This function is for setting the time and date in the panel. The time is entered in the 24-

hour format.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 109 110

Žádné komentáře

Digital Security Controls PC1575 Instalační manuál Strana 68